Velvet Crawler Shock Medium (90mm) Pair (2)
The highest quality RC products offered in the market today
Made by Kyosho using the highest quality materials and components
This includes everything needed to build 2 shocks except silicone shock fluid.
The Kyosho Velvet Coated Triple Cap Shocks feature threaded shock bodies, as well as an improved cartridge design
The Velvet coating on the shock body also reduces stiction, as well as wear on the shock piston. Velvet coated shocks offer increased shock consistency, and improved overall performance compared to shocks with a standard anodized coating.
Includes a pair of Dlux springs of choice and Team Brood Delrin Spring Retainers.
If you desire different springs for each pair of shocks you are purchasing, make sure to build one pair, add to cart and then go back, refresh and build the other pair. If you add them to cart as 2 pairs at once, the springs will be the same.
Dlux/DravTech Ultra Soft/White – 0.07 N/mm
Dlux/DravTech Soft/Black – 0.13 N/mm
Dlux/DravTech Medium/Red – 0.25 N/mm
Dlux/DravTech Hard/Green – 0.35 N/mm
Extended Travel Cartridges allows approximately 4mm of additional travel. This option includes the shorter bushing required for use with.
Red Aluminum Shock Caps are purely a cosmetic option to match the Extended Travel Cartridges.
Rod End Cap Mod replaces the plastic cap part with a black anodized aluminum part that uses either an 8mm or 10mm screw (both included) that can then be used with your choice of rod ends (not included). These allow for a lower profile setup and can be used to alter the shock length. You must use blue threadlock to secure the screws and the cap o-ring must still be used to prevent leaks.
Shock Limiter Kit can be used internally or externally to limit travel. Precision machined out Delrin, these units are available in 11 thicknesses in .25mm increments, which reduces the amount of stacking required. Stacking internally can cause inconsistent shock performance and external stacking increase chances dirt or debris getting lodged between them which can alter travel. Kit includes the following:
(2) 0.50mm Delrin Shock Limiter
(2) 0.75mm Delrin Shock Limiter
(2) 1.00mm Delrin Shock Limiter
(2) 1.25mm Delrin Shock Limiter
(2) 1.50mm Delrin Shock Limiter
(2) 1.75mm Delrin Shock Limiter
(2) 2.00mm Delrin Shock Limiter
(2) 2.25mm Delrin Shock Limiter
(2) 2.50mm Delrin Shock Limiter
(2) 2.75mm Delrin Shock Limiter
(2) 3.00mm Delrin Shock Limiter
Team Brood Formula SK O-ring Grease can be used on all types of O-Rings. Greasing O-rings prevents them from drying out and failing, while also providing a better seal on the shaft and preventing leaks.