Aluminum AE B6 Slipper Eliminator

Aluminum AE B6 Slipper Eliminator

Only works with AE B6.1 Buggy or later series Top Shafts. Secure Slipper Eliminator to Kimbrough Spur Gear (KIM145, KIM146, etc.) with 3 M3x5mm Button Head Screws. Use a small amount of thread lock to secure the screws. Slide setup onto the Top Shaft, then slide M3x50mm Button Head screw through Top Shaft. On the opposite end of the screw, place included M3x.25mm washer on the screw and then tighten down included M3 Unflanged Lock Nut. Do NOT over tighten nut or screws. Firmly snug is plenty of force to hold units on.

Weight – 2.0 Grams (does not include weight of screws,washer,nut,or spur)
Material – 7075 Aluminum
Coating – Blue Anodization

Includes:
(1) Aluminum Slipper Eliminator
(3) Nickel Plated 12.9 M3x5mm Button Head Screws
(2) M2.5x2mm Set Screws
(1) 12.9 M3x50mm Button Head Screw
(1) Aluminum M3x.50mm Washer
(1) Non-Serrated Unflanged M3 Aluminum Lock Nut